Sheet Piles - AZ12-770

These Z-shaped sheet piles are the continuous form of the web and the specific location of the interlock symmetrically on both sides of the neutral axis.

GOOD CORROSION RESISTANCE, THE STEEL BEING THICKEST AT THE CRITICAL CORROSION POINTS

Large width resulting in high installation performance and enhanced watertightness

Quality DESIGNED interlock

extremely competitive section modulus/mass relation

Can be supplied and installed as single 700mm wide piles or as double 1400mm wide piles.

Buy back offer available.

Technical Specification

Profile	W (mm)	H (mm)	T (mm)	S (mm)	Weight (kg/m)	Weight (kg/m²)	Moment of Inertia (cm⁴/m)	Elastic Section Modulus (cm³/m)	Plastic Section Modulus (cm³/m)
Profile	W (mm)	H (mm)	T (mm)	S (mm)	Weight (kg/m)	Weight (kg/m²)	Moment of Inertia (cm⁴/m)	Elastic Section Modulus (cm³/m)	Plastic Section Modulus (cm³/m)	AZ12-770	770	344	8.5	8.5	72.6	94.0	21 430	1 245	1 480

	A cm²	G kg/m	I_y cm⁴	W_el,y cm³	r_g cm	A_L m²/m
	A cm²	G kg/m	I_y cm⁴	W_el,y cm³	r_g cm	A_L m²/m	Per S	92.5	72.6	16 500	960	13.36	0.93
Per D	185.0	145.2	33 000	1 920	13.36	1.85
Per m of wall	120.1	94.3	21 430	1 245	13.36	1.20

A	Sectional Area
G	Mass per m
I_y	Moment of inertia about the main neutral axis y-y
W_el,y	Elastic section modulus
r_g	Radius of gyration about the y-y axis
A_L	Coating area. One side, excludes inside of interlocks
S	Single pile
D	Double pile