GRiPSHORE® GRP Trench Box Gripshore is a lightweight shoring solution for excavations up to 1.5m deep with widths from 0.62m to 2.0m. The GRP Trench Box panels create a working area of 1.5m long and an under strut clearance of 0.57m to allow services to pass. For trenches up to 2.4m deep and 1.75m wide […]
Trench Box Our Trench Box is a two-sided mechanical excavation support system, ideal for the installation of utility pipes and services when ground movement is non-critical. Bottom cutting edge for ease of installation Top panels available to increase excavation depth Designed to be installed by the excavator and lower in place technique Compatible with endsafe […]
Trench Sheets Trench sheets provide an effective ground solution to support the vertical faces of trenches and excavations. Galvanising service Clutch sealing service Available lengths: 2m – 4m The AutoCAD Blocks for all the products featured within this section can be easily accessed and downloaded directly from the official MGF website, providing convenient resources for […]
Sheet Piles Z-type sheet piles are the preferred choice for permanent applications. Among the essential characteristics of Z-shaped sheets are the continuous form of the web and the specific location of the interlock symmetrically on both sides of the neutral axis. These two attributes have a positive influence on the section modulus. The AZ® series […]
Walers and Struts These are a simple to assemble two-sided, hydraulic bracing system designed for use with steel trench sheets to horizontally brace small trenches for the safe installation of utilities. The complete system can support trench widths of 0.6m to 3.8m and is normally installed using an excavator. A range of designs and lengths […]
GRiPSHORE® GRP Vertishore A versatile shoring solution designed to be used in shallow trenches for the safe installation of utilities in excavations up to 2.0m deep with widths from 0.57m to 2.0m. GRP Vertishore is available with or without a 0.5m backing board and can be provided in lengths of 0.5m, 1.6m and 2.1m. Lightweight […]
Aluminium Trench Box Our Trench Box is a lightweight, two-sided mechanical excavation support system ideal for installing shallow utility pipes and services where ground movement is non-critical. For trenches up to 2.4m deep and 1.75m wide Ideal for use when a small excavator restricts the maximum weight Recommended pipe lengths of up to 2.5m and […]
GRiPSHORE+ Trench Box There is a range of GRiPSHORE+ Trench Boxes including 3 lengths of panels, 1.2m, 2.0m and 3.0m, each length featuring a 1.2m high base panel and 0.8m high top panel. The panels are propped off from each other using a range of lightweight, telescopic steel struts, manufactured out of S700 steel box […]
GRiPSHORE® GRP Vertishore A versatile shoring solution designed to be used in shallow trenches for the safe installation of utilities in excavations up to 2.0m deep with widths from 0.57m to 2.0m. GRP Vertishore is available with or without a 0.5m backing board and can be provided in lengths of 0.5m, 1.6m and 2.1m. Lightweight […]
T700 Brace This product has been designed to brace larger and deeper cofferdams with clear spans, this system is widely used on major basement and substructure projects, providing temporary support for spans up to 30.7m. This brace is the strongest modular bracing system that is available in the UK This product is compatible with our […]
