Endsafe Panels Endsafe Panels are a steel panel system designed to safely support vertical soil faces at open ends of boxes or trench excavations where it is not possible to batter the soil back. Designed to be installed by an excavator For trench depths up to 4.8m deep and widths from 1.2m to 4.0m (panels […]
Manhole Brace Manhole Brace is a simple to assemble, four-sided hydraulic frame system has been designed to brace small cofferdams and ensure the safe construction, pipe installations and tanks as well as carrying out repairs to highways and footpaths. Available in a range of sizes from 1.4m to 6.0m Individual legs are interchangeable and can […]
GRiPSHORE+ Trench Box There is a range of GRiPSHORE+ Trench Boxes including 3 lengths of panels, 1.2m, 2.0m and 3.0m, each length featuring a 1.2m high base panel and 0.8m high top panel. The panels are propped off from each other using a range of lightweight, telescopic steel struts, manufactured out of S700 steel box […]
GRiPSHORE® GRP Trench Box Gripshore is a lightweight shoring solution for excavations up to 1.5m deep with widths from 0.62m to 2.0m. The GRP Trench Box panels create a working area of 1.5m long and an under strut clearance of 0.57m to allow services to pass. For trenches up to 2.4m deep and 1.75m wide […]
Trench Box Our Trench Box is a two-sided mechanical excavation support system, ideal for the installation of utility pipes and services when ground movement is non-critical. Bottom cutting edge for ease of installation Top panels available to increase excavation depth Designed to be installed by the excavator and lower in place technique Compatible with endsafe […]
Trench Sheets Trench sheets provide an effective ground solution to support the vertical faces of trenches and excavations. Galvanising service Clutch sealing service Available lengths: 2m – 4m The AutoCAD Blocks for all the products featured within this section can be easily accessed and downloaded directly from the official MGF website, providing convenient resources for […]
Sheet Piles Z-type sheet piles are the preferred choice for permanent applications. Among the essential characteristics of Z-shaped sheets are the continuous form of the web and the specific location of the interlock symmetrically on both sides of the neutral axis. These two attributes have a positive influence on the section modulus. The AZ® series […]
