Drag Box

A simple to assemble, two-sided mechanical shield system designed for use in trenches up to 5.0m deep and 3.2m wide. This two-sided trench application is ideal when installing utility pipes in non-urban environments where the ground is self-supporting and ground movement is non-critical.

DESIGNED TO BE INSTALLED BY EXCAVATOR USING THE EXCAVATE AND DRAG TECHNIQUE

FRONT CUTTING EDGE TO EASE FORWARD MOVEMENT, ALONG PRE-EXCAVATED TRENCH

HIGH CLEARANCE REAR STRUT TO ACCOMMODATE LAID SERVICE

‘HOG-BACK’ STRUTS AVAILABLE FOR INCREASED CLEARANCE

This two-sided trench application is ideal when installing utility pipes in non-urban environments where the ground is self-supporting and ground movement is non-critical.

Technical Specification
Video Guide

Description (m)	Length x Height (mm)	Internal Width (mm)	Panel Thickness (mm)	Box Weight (kg)	Length between Struts (m)	Clearance below Rear Strut (m)
Description (m)	Length x Height (mm)	Internal Width (mm)	Panel Thickness (mm)	Box Weight (kg)	Length between Struts (m)	Clearance below Rear Strut (m)	3.2 x 1.5	3220 x 1460	0.6 – 3.0	60	1004	2.6	0.8
4.0 x 2.0	4000 x 2060	0.6 – 3.0	60	2028	3.0	1.2
5.0 x 1.8	5100 x 1824	0.6 – 3.0	100	2612	4.2	1.1
5.0 x 2.4	5100 x 2424	0.6 – 3.0	100	3186	4.2	1.4
5.0 x 3.2	5100 x 3260	0.6 – 3.0	100	4720	4.2	2.3
7.5 x 2.0	7500 x 2048	0.6 – 3.0	100	5120	6.6	1.5
7.5 x 2.4	7500 x 2460	0.6 – 3.0	100	5920	6.6	1.5